PAT-87000-xx
The Dual Charging Cradle is designed to be connected directly to a vehicle’s battery system and can be configured to provide an alarm if the handheld unit is not attached to the charger. The charger is compatible with both the Trident H212 and the Smart Dig Wand H106. The charger can also be powered via an optional USB cable
Wire Colour | Name | Notes |
Red | Battery | 12V or 24V |
Black | Ground |
|
Yellow | Alarm Enable | Connect to battery to enable alarm. Can be left unconnected if unused. |
Green | Alarm Output | If the Alarm Enable is connected to the battery, the Alarm Output will output the battery voltage if the handheld is NOT attached to the charger. If the handheld is on the charger, the Alarm Output wire will be at 0V. This output can provide up to 500mA. |
Alarm Option:
The use of the Alarm Output is optional and is enabled by connecting Alarm Enable to the battery voltage. If the handheld is not on the charger, the Alarm Output wire will provide battery voltage. This can be used to power an LED, buzzer, or a relay.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article