U150 Universal Charger (PAT-65000-xx)

Modified on Tue, 07 Feb 2023 at 09:48 AM

U150 Universal Charger (PAT-65000-xx)

Power Inputs

USB-C

USB PD (Minimum 9V, 30W). Note that a USB-C to USB-C cable must be used. USB-A to USB-C will not supply sufficient power for the U150.

Wired Directly to Machine (some models)

Wire Colours and Pin-Out

Wire Colour	Name	Notes
Red	Power	+12V (2.5A) or +24V (1.25A)
Black	Ground
Yellow	Alarm Enable	Connect to power to enable alarm. Can be left unconnected if unused.
Green	Alarm Output*	If the *Alarm Enable* is connected to the battery, the *Alarm Output* will output the battery voltage if the handheld is NOT attached to the charger. If the handheld is on the charger, the *Alarm Output* wire will be at 0V. This output can provide up to 500mA.

Alarm Option

The use of the Alarm Output is optional. The purpose of this output is to allow the user to control an external device (LED, buzzer, relay, etc…). For example, this output can be configured to turn on when the remote control is missing from the charger AND the parking brake or ignition is turned on.

This output enabled by connecting Alarm Enable to the power wire. If the handheld is not on the charger, the Alarm Output wire will provide power (+12V or +24V).

Mute Button (some models)

While charging, the button LED will be off.

When not charging, the button LED will flash and the alarm buzzer will sound until the remote control is returned to the charger.

Mute – To temporarily mute the alarm, press the button. The LED will repeatedly flash three times followed by a pause and the alarm will be silenced for 30 minutes.

Silence – Hold the button for 3 seconds. The button LED will turn off and the alarm buzzer will be silenced indefinitely.

Putting a remote control on the charger will automatically clear “Mute” or “Silence” modes.

Right LED

Colour	Description
Flashing Green	Insufficient power source. Ensure that the charger is being powered by +12V to +24V (when wired directly) or that a USB-C to USB-C cable is being used with a valid power supply (USB PD) capable of providing at least 30W. Note: USB-A to USB-C cables will not provide sufficient power for the Universal Charger.
Solid Green	Charger powered with sufficient power supply and no device is currently being charged.
Solid Magenta	Low power charging mode.
Solid Blue	High power charging mode.